User's Manual

DRG600WiFi User Guide Setup
Page 31 of 104
Wireless
The DRG600-WiFi settings must match the other Wireless stations.
By default, the DRG600-WiFi will automatically accept both 802.11b and 802.11g connections,
and no configuration is required for this feature.
To change the DRG600-WiFi's default settings for the Wireless Access Point feature, use the Wireless link on the
main menu to reach the
Wireless screen. An example screen is shown below.
Figure 8. Wireless Screen
Identification
Region
Select your region from the drop-down list. This field displays the region of operation
for which the wireless interface is intended. It may not be legal to operate the router in
a region other than the region shown here. If your country or region is not listed, please
check with your local government agency for more information on which channels you
are allowed to use, and select a region which allows those channels. (The channel list
changes according to the selected region.)
Station Name The device name is displayed (cannot be changed).
SSID
On your PC, some Wireless status screens may display this name as the Access Point in
use.
If using an ESS (Extended Service Set, with multiple access points) this ID is called an