User's Manual

DRG600WiFi User Guide Setup
Page 28 of 104
PC Database
The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). For most users, it eliminates
the need to enter IP addresses, and also prevents errors.
However, if you need to configure the Wireless Router BEFORE installation, you must use this functionality.
Known PCs This lists all current entries (PCs or network devices).
Name
If adding a new PC to the list, enter its name here. It is best if this matches the PC
"hostname".
IP Address
If adding a new PC to the list, enter the IP Address of the PC here. The PC will be sent a
"ping" to determine its hardware address. If the PC is not available (not connected, or not
powered On) you will not be able to add it.
Add
Use this button to add the PC to the list. The data for the selected PC will then be shown
while it is selected. (Click "Refresh" to reload the current data.)
Advanced
Administration
Use this button to see more details. You will be taken to the PC Database screen where
you can edit more properties. See “PC Database screen” on page 29.
Delete
Delete the selected PC from the list. This should be done in 2 situations:
• The PC has been removed from your LAN.
• The entry is incorrect.
Refresh
Updates the fields in this screen. Any new clients discovered will be displayed in the
Known PCs field
Generate Report
This opens the report window and displays details for all PCs in the PC Database: