User's Manual

DRG600WiFi User Guide Introduction
Page 11 of 104
Advanced Internet Functions
Virtual Servers.
This feature allows Internet users to access Internet servers on your LAN. The required
setup is quick and easy.
DDNS Support.
DDNS (Dynamic DNS) allows Internet users to connect to Virtual
Servers on your LAN using a domain name, even if your IP address is not fixed.
DMZ.
One (1) PC on your local LAN can be configured to allow unrestricted 2-way communication with
Servers or individual users on the Internet. This provides the ability to run programs which are in-
compatible with Firewalls.
URL Filter.
Use the URL Filter to block access to undesirable Web sites by LAN users.
Internet Access Log.
See which Internet connections have been made.
Access Control.
Using the Access Control feature, you can assign LAN users to different groups, and
determine which Internet services are available to each group.
VPN Pass through Support.
PCs with VPN (Virtual Private Networking) software using PPTP, L2TP and
IPSec are transparently supported - no configuration is required.
Wireless Features
Standards Compliant.
The DRG600-WiFi complies with the IEEE802.11 b/g specifications for Wireless
LANs.
Supports both 802.11b and 802. 11g Wireless Stations.
The 802.11g standard provides for backward
compatibility with the 802.11b standard, so both 802.11b and 802.11g Wireless stations can be used
simultaneously.
Speeds up to 54Mbps.
All speeds up to the 802.11g maximum of 54Mbps are supported.
WEP support.
Support for WEP (Wired Equivalent Privacy) is included. Key sizes of 64 Bit and 128 Bit
are supported.
WPA support.
Support for WPA is included. WPA is more secure than WEP, and should be used if
possible.
WPA2 support.
Support for WPA2 is also included. WPA2 uses the extremely secure AES encryption
method.
Wireless MAC Access Control.
The Wireless Access Control feature can check the MAC address (hardware
address) of Wireless stations to ensure that only trusted Wireless Stations can access your LAN.
Simple Configuration.
If the default settings are unsuitable, they can be changed quickly and easily.
WPS Support.
WPS (Wi-Fi Protected Setup) can simplify the process of connecting any compatible device
to the wireless network by using the push button configuration (PBC) on the Wireless Access Point, or
entering a 8-digit PIN code.
LAN Features
2-Port Fast ethernet switch.
The DRG600-WiFi incorporates a 2-port 10/100BaseT fast ethernet switch,
making it easy to create or extend your LAN.
DHCP Server Support.
Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and
other devices upon request. The DRG600-WiFi can act as a DHCP Server for devices on your local