User Manual

Wireless 3-in-1 Companion User Guide

SSID If the desired wireless network is currently available, you can

select its SSID. Otherwise, type in the SSID of the desired wireless

network.

PSM Select the desired power saving options.

Network Type Select the desired option:

• Infrastructure - Select this to connect to an Access point.

• Ad Hoc - Select this to if there is no Access point, PCs con-

nect directly to each other.

RTS Threshold This setting is provided for technical support staff.

Fragment Threshold This setting is provided for technical support staff.

Authentication and Security Tab

Figure 11: Authentication and Security Tab

Data - Authentication and Security Tab

Authentication Type You MUST select the option to match the Wireless LAN you

wish to join. The available options are:

• Open - Broadcast signals are not encrypted. This method

can be used only with no encryption or with WEP.

• Shared - Broadcast signals are encrypted using WEP. This

method can only be used with WEP.

• WPA - This method uses a key which is automatically

generated.

• WPA-PSK - PSK means "Pre-shared Key". You must enter

this key value; it is used for both authentication and en-

cryption.

Encryption The available options depend on the Authentication method