User Manual

Setup
7
Rescan Click this button to rescan for all Wireless networks.
Add to Profile Click this to complete configuration of the selected Wireless Network.
See below for details.
To Connect to a Wireless Network
1. Double-click on the desired network.
2. You will then see the Add Profile screen.
See below for details on using this screen.
Note that once you are connected to a Wireless network, the Site Survey screen will identify the
current wireless network with a green "handshake" icon, as shown below.
Figure 9: Site Survey Screen - Connected
Add Profile Screen
This screen is accessed by clicking the Wireless Security button on the AP Setup screen.
It has 2 tabs - Configuration and Authentication and Security.
Configuration Tab
Figure 10 Settings Tab
Profile Name Enter a suitable name for this profile. Each profile must have a
unique name.