User Manual

34
3.3 .3 Prot ocol
Set or change protocol information from the Protocol tab.
Do not change settings
If this box is checked, the protocol setting is not changed when the profile is applied.
Use below settings
Some of the protocol settings below can be changed if the Do not change setting box is unchecked:
Ÿ Power Save Mode – Sets the power mode. Available options are Continuous Access or Max
Power Save. The default is Continuous Access.
Ÿ Preamble (802.11b) – Sets the Radio Preamble to Auto or Long. This option takes effect
only when attaching to an 802.11b network.
Ÿ Transmit Rate – The range of the data rate depends on the type of AP that the client card is
connected to. The default setting is Auto Select.
Ÿ Fragment Threshold – Sets the fragmentation threshold (the size that packets are fragmented
into for transmission). The default setting is 2346.
Ÿ RTS/CTS Threshold – Sets the packet size at which the AP issues a Request-To-Send (or
Clear-to-Send) frame before sending the packet. The default setting is 2346.
Ÿ Reset button – Clicking Reset returns the protocol settings to their default values.