User Manual

3.3 Profile M anage r Tab
Clicking on the Profile Manager tab displays the Profile Manager dialog box. The Profile Manager displays
the p rofiles available and allows you to create, modify, and delete profiles:
Profile List Window
The window on the left side of this tab lists all of the profiles available. Highlighting a profile selects it. If the
Default box is checked, that profile is used in auto-configuration mode when the link is lost. If it is unchecked,
that profile is excluded in auto-configuration. The controls associated with this window are:
Ÿ Apply Profile – applies the profile selected. Apply the profile by double-clicking on the desired
profile.
Ÿ Move Up / Move Down – move the list up and down in the window. All profiles with the Network
Type set to Infrastructure are displayed before the profiles with the Network Type set to Ad Hoc.
Ÿ Delete – deletes a profile
Ÿ Create – creates a profile
Ÿ Save – saves changes made to a selected profile
Profile Setting The Profile Settings are used to display information about the profile selected in the Profile
List window. The information is divided into three tabs: Network Info, Security, and Protocol.