User's Manual

Using the Windows Utility
11
Advanced Settings Screen
Once you have created a profile, as described above, the Advanced Settings tab will be
available on the Profile Manager screen.
Figure 10: Advanced Settings Screen
Data - Advanced Settings Screen
Do not change
settings
Enable this check box if you don’t want to modify the settings in
this screen.
Preamble (2.4GHz)
Normally, this should be left at "Auto".
Transmit Rate
Use this to manually set the speed, if desired. The default is "Auto".
Fragment
Threshold
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
RTS/CTS Threshold
The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
802.11n
Enable 802.11n
Network
Enable this if you want to use the 802.11n network.
Channel Width
Select the desired channel width.
Guard Interval
Use this to manually set the interval, if desired. The default is
"Auto".
Extension Channel
Select the desired channel.
Antenna Selection
Select the desired option. The default is set to "Auto".