Installation Guide

4
PIR Sensor
The PIR sensor is for motion detection.
Rear Panel
Micro USB Connector
Connect the Micro USB cable to the USB port.
The Micro USB cable is provided power from external devices. The connection process is as
shown in the picture above. Please ensure that the screws are driven firmly into the screw
holes.
Side Panel
Reset
When pressed and held for over 10 seconds, the LED will flash red,
which will return the Camera to its default settings.
SIM Card Slot
Use a screwdriver to loosen the screw and open the lid to insert a
SIM card.
CAUTION:
 Improper usage may lead to risk of fire and burns
 Do not open or interfere with the camera
 Keep the product away from open flames
 Caution! Battery may become hot
 Follow battery usage instructions
 Dispose of used batteries according to the instructions
SIM Card