User's Manual

Wireless Access Point User Guide
4
Physical Details
Front Panel LEDs
Figure 2: Front Panel
Antenna Ports
(Left Side)
Attach the 5G antennas here.
Status On - Error condition.
Off - Normal operation.
Blinking - During start up, and when the Firmware is being upgraded.
Power On - Normal operation.
Off - No power
Ethernet On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub) port.
Flashing - Data is being transmitted or received via the corresponding
LAN (hub) port.
2.4 GHz On - Wireless connection is available in 2.4GHz mode.
Off - Wireless connection is not available in 2.4GHz mode.
Flashing - Data is being transmitted or received via the Wireless
access point. Data includes "network traffic" as well as user data.
5 GHz On - Wireless connection is available in 5GHz mode.
Off - Wireless connection is not available in 5GHz mode.
Flashing - Data is being transmitted or received via the Wireless
access point. Data includes "network traffic" as well as user data.
Antenna Ports
(Right Side)
Attach the 2.4G antennas here.