User's Manual

Wireless Access Point User Guide

Network - IP Settings Screen

Figure 42: IP Settings Screen

Data - IP Settings Screen

IP Settings

Select the desired option from the drop-down list.

 Static - Select it if you want to configure one static IP Address for

the Access Point. You need input following settings:

 IP Address: The IP Address of this device.

 Subnet Mask: The Network Mask associated with the IP

|Address above.

 Default Gateway: The IP Address of your Gateway or Router.

 Primary DNS: Specify a primary DNS here. It's necessary for

functions like NTP Client, E-Mail alert and so on.

 Secondary DNS: Specify a secondary DNS here. It's optional.

 DHCP Client - Select it if you want the device to obtain an IP

address automatically.

 PPPoE Client - This is the most common login method, widely

used with DSL modems.

 Username - The user name (or account name) provided by

your ISP.

 Password - Enter the password for the login name above.

 Timeout - Enter the desired value in seconds for the timeout

period.

 Retry - Enter the retry times for the PPPoE connection.

 Auth-Type - Choose the desired option from the list.

 MTU - Enter the number between 128 and 1492 for MTU.