User's Manual

Access Point Setup

802.11b Protection

Mode

The Protection system is intended to prevent older 802.11b

devices from interfering with 802.11g transmissions. (Older

802.11b devices may not be able to detect that the 802.11g

transmission is in progress.)

Station Idle Time

This indicates the time (seconds) of the station whose node will

be deleted from AP if there is no traffic for the link.

TX/RX Chainmask

Select the desired TX/RX chainmask.

Enable A-MPDU

Enable this setting if you wish to use this feature.

Enable Worldwide

Mode

Enable this setting if you want to use this mode, and your

Wireless stations also support this mode.

Enable WMM (Wi-Fi

Multimedia) Support

Check this to enable WMM (Wi-Fi Multimedia) support in the

Access Point. If WMM is also supported by your wireless

clients, voice and multimedia traffic will be given a higher

priority than other traffic.

Enable WMM Power-

Save

Enable or Disable WMM Power-Save feature.

Enable Link Integrity

If enabled, the device can detect the plugging or unplugging of

the Ethernet cable and start/stop the related services

correspondingly.