User's Manual

ManualsBrandsSercomm ManualsComputers & Accessories11n Dual Band Wireless Access Point

Access Point Setup

Max Upstream Rate

Enter the maximum upstream rate for the VAP. "0" means no limit.

Station Rate Limit

Max Downstream

Rate

Enter the maximum downstream rate for each wireless station. "0"

means no limit.

Max Upstream Rate

Enter the maximum upstream rate for each wireless station. "0"

means no limit.

Security

Security System

Choose the security method from the drop-down list. Refer to the

following section for more details.

Security Settings

Select the desired option, and then enter the settings for the selected method.

The available options are:

 None - No security is used. Anyone using the correct SSID can connect to your network.

 WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption

system is not very strong.

 WPA-PSK - Like WEP, data is encrypted before transmission. WPA is more secure than

WEP, and should be used if possible. The PSK (Pre-shared Key) must be entered on each

Wireless station. The 256Bit encryption key is derived from the PSK, and changes fre-

quently.

 WPA2-PSK - This is a further development of WPA-PSK, and offers even greater securi-

ty, using the AES (Advanced Encryption Standard) method of encryption.

 WPA-PSK and WPA2-PSK - This method, sometimes called "Mixed Mode", allows

clients to use EITHER WPA-PSK (with TKIP) OR WPA2-PSK (with AES).

 WPA with Radius - This version of WPA requires a Radius Server on your LAN to

provide the client authentication according to the 802.1x standard. Data transmissions are

encrypted using the WPA standard.

If this option is selected:

 This Access Point must have a "client login" on the Radius Server.

 Each user must have a "user login" on the Radius Server.

 Each user's wireless client must support 802.1x and provide the login data when

required.

 All data transmission is encrypted using the WPA standard. Keys are automatically

generated, so no key input is required.

 WPA2 with Radius - This version of WPA2 requires a Radius Server on your LAN to

provide the client authentication according to the 802.1x standard. Data transmissions are

encrypted using the WPA2 standard.

If this option is selected:

 This Access Point must have a "client login" on the Radius Server.

 Each user must authenticate on the Radius Server. This is usually done using digital

certificates.

 Each user's wireless client must support 802.1x and provide the Radius authentication

data when required.