User's Manual

Access Point Setup
21
cause interference with other devices.
Channel
Bandwidth
Select the desired bandwidth from the list.
Extension
Sub-Channel
Select Above or Below Primary Channel from the list.
Operation Mode
Figure 17: Operation Mode
Data - Operation Mode Settings Screen
Operation
Wireless Radio
Select the either Radio 1 or Radio 2 for the wireless feature.
Operation Mode
Select the desired option from the list:
 AP: Choose this to make the device act as a normal AP.
 AP+WDS: Select this mode and make configurations in Vitrual
APs pages. In WDS mode, you can choose which interface to be
worked as a root AP or WDS client. Select only one interface to
be worked as a root AP for the device is recommended. A root AP
is the "Master" for a group of Bridge-mode APs. The other
Bridge-mode APs must be set to Point-to-Point Bridge mode
(WDS Client) with the AP's MAC address.
Wireless - Virtual APs Screen
Clicking the Virtual APs link on the Wireless menu will result in a screen like the following.