User's Manual

Access Point Setup
13
System - SNMP Settings
SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program
on your PC. To reach this screen, select SNMP in the System section of the menu.
Basic Screen
Figure 10: Basic Screen
Data - Basic Screen
Basic
SNMP v1/v2/v3
Use this to enable or disable SNMP as required.
Contact
The identification of the contact person.
Device Name
Enter the desired name for the device.
Location
The physical location of this node.
Read Only
community
Data can be read, but not changed.
Read/Write
Community
Data can be read and changed.