User's Manual

Setup

Configuration Program

The Wireless ADSL Router contains an HTTP server. This enables you to connect to it, and

configure it, using your Web Browser. Your Browser must support JavaScript.

The configuration program has been tested on the following browsers:

• Netscape 7.1 or later.

• Mozilla 1.6 or later

• Internet Explorer V5.5 or later

Preparation

Before attempting to configure the Wireless ADSL Router, please ensure that:

• Your PC can establish a physical connection to the Wireless ADSL Router. The PC and

the Wireless ADSL Router must be directly connected (using the Hub ports on the Wire-

less ADSL Router) or on the same LAN segment.

• The Wireless ADSL Router must be installed and powered ON.

• If the Wireless ADSL Router's default IP Address (192.168.0.1) is already used by an-

other device, the other device must be turned OFF until the Wireless ADSL Router is

allocated a new IP Address during configuration.

Using your Web Browser

To establish a connection from your PC to the Wireless ADSL Router:

1. After installing the Wireless ADSL Router in your LAN, start your PC. If your PC is

already running, restart it.

2. Start your WEB browser.

3. In the Address box, enter "HTTP://" and the IP Address of the Wireless ADSL Router, as

in this example, which uses the Wireless ADSL Router's default IP Address:

HTTP://192.168.0.1

4. When prompted for the User name and Password, enter values as follows:

• User name admin

• Password password