User's Manual

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless ADSL Router.

Requirements

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

• TCP/IP protocol must be installed on all PCs.

• For Internet Access, an Internet Access account with an ISP, and a DSL connection.

• To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE

802.11g, IEEE 802.11b or IEEE 802.11n Draft specifications.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless ADSL Router.

For best Wireless reception and performance, the Wireless

ADSL Router should be positioned in a central location with

minimum obstructions between the Wireless ADSL Router

and the PCs.

Also, if using multiple Access Points, adjacent Access

Points should use different Channels.