User's Manual

Page 71
Configuration Data The Print Server requires the following "General" data, and the data for the mode (Print Server or Remote Printer) you are using.
General Device Name The device name (Default Server Name) is shown on a sticker on
the base of the device. Change this if you wish. The new name MUST NOT exceed 19 characters, nor contain any spaces.
Device Password Default is NULL (no password). NetWare Mode Print Server or Remote Printer. Frame Type Select the frame types used by your network. (Ethernet 802.2,
Ethernet 802.3, Ethernet SNAP, and Ethernet II) By default, all frame types are enabled.
Novell Remote Printer Mode Novell Printer Server for P1
NetWare print server to service the Print Server's parallel port 1.
Novell Printer Server for P2
NetWare print server to service the Print Server's parallel port 2 (P2).
Novell Print Server Mode NDS Tree Name Not applicable.
(NetWare NDS mode only)
Print Server NDS Context
Not applicable. (NetWare NDS mode only)