User's Manual

Page 70
With either Bindery or NDS, two (2) NetWare operating modes are possible -Print Server and Remote Printer. Print Server mode is recommended.
Novell Distributed Printing Services (NDPS) under NetWare 5 is also supported.
Configuration Methods (Bindery or NDS) The following configuration methods are available. In each case, you must be logged into the required NetWare Server with ADMIN rights. Also, if using Windows, Novell's Client32 should be installed on your PC. Without Client32, only limited configuration changes can be made on the NetWare Server. Setup Wizard Using the Setup Wizard is recommended. This allows configuration of the Print Server in NetWare Print Server Mode, which is the recommended system. BiAdmin For more control and flexibility, or to use NetWare Remote Printer Mode, you can use the supplied BiAdmin management utility. Provided you have Novell's Client 32 installed, BiAdmin will allow you to configure the NetWare Server as well as the Print Server. • BiAdmin is installed by the Administrator menu option on the CD-ROM. • See Chapter 5 for general information on using BiAdmin. • The NetWare Manual (in the Manual\NetWare folder on the CD-ROM) contains detailed information on using BiAdmin with NetWare Servers. Other Methods If you are unable to use Windows-based programs for configuration, the following method is available to configure the Print Server:
Quickset Command-line DOC program, intended only to configure the Print
Server for use with NetWare V2, 3 and 4. This program also has a limited ability to configure the NetWare Server itself.
• These program is provided on the CD-ROM, in the Utility folder.
• The documentation for the program is provided in sub−folders of the Manual folder on the CD-ROM.