User's Manual

Page 36
considered to be the same name.
Response Time Set how fast jobs are sent to the printer. The default value of zero
(0) delay should be increased only if your printer cannot cope with
no delays.
Abort Print Job
if Error
YES terminates a print job if a printing error occurs. NO (default)
will try to continue but may cause print errors. If print errors occur,
try setting this value to YES.
NetWare ( for PS723H only)
On the PS723H, the NetWare screen will be available.
Figure 15: NetWare Screen
General
NetWare Mode Select Print Server or Remote Printer, as appropriate. The default
is Print Server.
Frame Type Select the frame types used by your network. (Ethernet 802.2,
Ethernet 802.3, Ethernet SNAP, and Ethernet II) By default, all
frame types are enabled.
Remote Printer Mode
Novell Printer
Server for P1
NetWare print server to service the Print Server's parallel port 1.
Novell Printer
Server for P2
NetWare print server to service the Print Server's parallel port 2
(P2), if fitted.