User's Manual

Page 9
MFP Print Server Utility Setup
1. The program will search for the MFP Printer Servers on the network, and the MFP Print
Server Utility screen will be displayed.
• The names of the attached printer servers will be displayed if possible.
• If the MFP is occupied by other user, the status field will display the information of
the user and IP address. Otherwise the default status icon should be
if the MFP is
available.
Figure 6: MFP Icon
If your MFP Print Server is not listed:
• Check that both the MFP Print Server and the printer are properly
connected, and powered on.
• Check that the proper Printer Driver has been installed.
2. Once the MFP has been connected successfully, the button will show "Disconnect" instead
of "Connect".