User's Manual

Page 12

Chapter 4

Web-Based Management

This chapter explains how to use your Web Browser to configure the Print Server.

Overview

The Print Server incorporates the HTTP server. This allows you to connect to the Print Server

and configure it using your Web Browser. Most browsers should work, provided they support

tables and forms.

Preparation

Because it supports dynamic IP Address allocation using DHCP, BOOTP, or RARP, the Print

Server ships with an IP Address of 0.0.0.0.

This is NOT a valid IP Address.

Therefore, you must do ONE of the following:

• Check your DHCP server (if you have one), and determine the IP Address allocated to the

Print Server.

• Use the Diagnostic Button (if fitted) to print a report which includes the current IP

address. (Press the Diagnostic Button, and hold it for 2 seconds.)

• Use the Setup Wizard or another Print Server utility to allocate a valid IP Address to the

Print Server.