User's Manual

Page 8
Figure 2: MFP Screen
3. Click OK or Skip if all the setup procedures listed on the first screen are checked.
4. Select your MFP Network Adapter, then click Next to continue.
Figure 3: Adapter Screen
5. Click Next to configure the IP Address screen.
• Select Obtain IP Address automatically if your LAN has a DHCP Server, otherwise
select Use following IP address.
• For Use following IP address, enter an unused address from the range used on your
LAN.
Use the same Subnet Mask and Default Gateway as PCs on your LAN.
6. Click Next to see the following screen