QUICK-START GUIDE RELOOP TERMINAL MIX 2
Installation and Setup The Reloop Terminal Mix 2 is a class compliant USB plug and play device for Mac, however requires drivers for Windows. You will find these on the installation cd provided within your Reloop Terminal Mix 2. Insert power cable here Unbalanced RCA Out (speakers out here) RCA Input (Input for external Line or Phono option) NOTE: Please ensure you have the latest available drivers AND firmware updates, which may be required in order to be compatible with Serato DJ.
4 5 67 8 24 25 2 30 31 9 1 13 14 15 10 11 12 32 33 16 34 36 26 37 17 27 38 28 39 29 18 19 20 21 22 23 35 41 29 40
NOTE: SHIFT button is used with other buttons that have shift functions. # Reloop Terminal Mix 2 Control Serato DJ Function Shift Modification 1 TEMPO FADER Adjust Tempo When in Sync mode, used to disable the Pitch Fader temporarily and change the zero position 2 OFFSET LED If you switch the deck and move the pitch fader the value will be stored. The LED shows whether the pitch fader is at its initial value when setting back.
# Reloop Terminal Mix 2 Control Serato DJ Function Shift Modification 20 CUP Stutter Play 21 CUE Temporary Cue 22 PLAY/PAUSE Play/Pause 23 DECK Select Active Deck 1/3 (Left Deck) or 2/4 (Right Deck) 24 GAIN Adjust channel gain 25 EQ Adjust Low/Mid/High 26 FILTER LP/HP filter combo adjust 27 CUE CHANNEL Cue selected channel in headphones 28 LOAD Load track to selected deck 29 CHANNEL FADER Adjusts channel volume 30 MASTER Adjusts master volume 31 BOOTH Adjusts booth vol
Looping Slicer You have the choice of Auto or Manual Looping within Serato DJ with the Reloop Terminal Mix 2. Press the SCISSORS button to activate Slicer Mode. Slicer Mode is when a specified range (or domain) is divided into eight equal sections, and these eight sliced sections are assigned to the respective HOT CUE buttons 1-4 and SAMPLER buttons 1-4. When the playhead reaches the end of the Slicer Domain, the entire Domain will shift to the right.
DJ-FX The DJ-FX in Serato DJ are powered by iZotope™. Click the FX tab to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect bank to a deck or Master Output. To activate an effect, click the ON button on your FX UNIT in the software, or the FX1 ON button on your controller. You can adjust effect parameters by using either software controls, or the FX1/FX2/FX3 and FXSEL knobs/buttons on the controller. There are two available modes in the DJ-FX.
SERATO VIDEO Serato Video is a software plugin for Serato Software which adds the ability to playback and mix video files, use effects and fader transitions with your Serato DJ Controller, an additional MIDI controller or your mouse/keyboard. For more information on Serato Video go to http://serato.com/video MIDI The MIDI control feature in Serato DJ provides the ability to map Serato DJ software functions to MIDI controller functions such as keyboards, triggers, sliders, and knobs.
Using the Tool Tips Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. For more information about how to use Serato DJ, please go to our website www. serato.
