User Manual

29
RECONSIDERATIONSONPRACTICALUSEOFTHEELECTRICBRUSHCUTTER
RECONSIDERATIONS ON PRACTICAL USE OF THE
ELECTRIC BRUSHCUTTER
1. TheElectricBrushcutterofthisclassisintendedforhouseholduse
only.ItisnotrecommendedtousetheBrushcutterforprofessional/
industrial works. The Brushcutter is not designed for continuous
operation, the recommended duty cycle: 15-minute operation/
10-minutebreak.
2. Whenusinganextensioncord,makesurethatthemainsvoltage
doesnotexceed230V.Theextensioncordshallmeetspecifications
listedinthetablebelow,otherwisevoltagedropintheextensioncord
maytakeplace,andrunningatalowervoltagewilldamagethemotor.
Length of the extension cord, m Minimum conductor cross section, mm
2
0-20 1.0
20-50 1.5
50-100 4.0
3. We recommend using double insulated cables with fused plugs
for outdoor use. Regularly checkplugs and extension cords, replace
if damaged. Do not use defective or non-standard extension cords,
cables,plugs.Alwaysobservepositionofthecableduringoperation,
keepitawayfromthecuttingzone,trynottotensionthecable.
4. DonotoperatetheElectricBrushcutteroutdoorsintherainorat
highairhumidityduetoincreasedriskofshortcircuits.
5. Donotallowpeopleandpetstostayintheworkareawhenusing
theElectricBrushcutter.
6. MakesurethatallelementsoftheElectricBrushcutterareingood
workingconditionbeforeoperating the tool. Do not applyexcessive
forcewhencutting,anddonotallowcontactoftheworkingsurface
withtheground–excessiveloadonthetrimmerspoolorcutterblade
maycausedamageinmechanismsoftheElectricBrushcutter.