User manual

63
Prophet-10 User’s Guide
Appendix C: Exporting and Importing Programs/Banks
3. Press globals a second time (this enables the lower set of parameters)
then press program selector 7 to select the pgm dump command. The
record button begins ashing.
4. Use the group select and bank select buttons to select the desired
option — program (PRO), bank (ban), group (GRP), user banks (USR),
all (ALL).
5. Press record. The program or bank is exported to your MIDI application.
Programs will load back into the same Group, Bank, and Program locations
from which they were originally exported.
Importing Programs and Banks
You can use a MIDI librarian application such as such as SysEx Librar-
ian for Macintosh, or MIDI-OX for Windows to transmit exported
program or banks back into your Prophet-10. You will need a computer
and an appropriate software application.
To import Programs or Banks as a SysEx le over MIDI:
1. Connect your Prophet-10 to a computer using a USB cable (or MIDI
cable, if you are using a dedicated MIDI interface).
2. Press the globals button on your Prophet-10 and press program select
button 6 (MIDI SysEx).
3. Use the group select and bank select buttons to choose either usb
or midi, depending on which port you are using to connect to your
computer.
4. Press the globals button twice to exit the Global parameters.
5. Open your MIDI librarian software and congure it to send SysEx
messages to your Prophet-10.
6. In the MIDI librarian, open the programs and/or banks you want to send.
7. Transmit the programs. The Prophet-10 should load them. They will
replace any existing programs in those same memory locations on the
synth.
Programs will load back into the same Group, Bank, and Program locations
from which they were originally exported.