User manual

62
Appendix C: Exporting and Importing Programs/Banks
Sequential
Resetting the Global Parameters
If you’re trying to track down a problem, it’s sometimes a good idea to
reset the Global parameters to their defaults. This is a quick way to make
sure that the Prophet-10 returns to its factory settings.
This will not erase any User programs.
To reset all Global parameters to their default settings:
1. Hold down the record button.
2. Press the globals button. Global parameters are reset.
3. You can now can play the Prophet-10 again.
Appendix C: Exporting and Im-
porting Programs/Banks
You can use the pgm dump command in the globals section to transmit the
current program, the current bank, the current group, all user banks, or
all banks (both user and factory) in SysEx format via the selected MIDI
port.
This allows you to save your programs so that you can share them or
archive them. Dumped programs will load back into the same bank and
program location in memory when received by the Prophet-10 via MIDI.
Make sure that your MIDI Editor or Librarian application of choice is open
and ready for data transfer and that you have made the necessary MIDI/USB
connections between the Prophet-10 and your computer.
To export a Program, Bank, Group, or all Banks as a SysEx le over
MIDI:
1. Press the globals button once (this enables the upper set of parameters)
then press program selector 6 to select the midi sysex command.
2. Use the group select and bank select buttons to select the appropriate
MIDI port — MIDI (MID) or USB (usb).