User manual

10
Setting Up the Prophet-10
Sequential
To save a program to a different Group and/or Bank location:
1. Press the record button. Its LED begins blinking.
2. Press the group button repeatedly to toggle through banks 1-5 to nd
the desired group location.
3. Press the bank button repeatedly to toggle through banks 1-5 to nd the
desired bank location.
4. Press a program selector button (1-8) to specify the “ones” digit of the
program. The record button LED stops blinking and the program is
saved into the User sound set.
Canceling Save
Sometimes you may want to cancel saving a program before you
commit.
To cancel the Save process before you commit:
• If the record button LED is ashing, press it again. The LED stops
ashing and saving is canceled. You can return to editing if you want.
Comparing Before You Save
Before saving a program to a new location, it’s a good idea to listen to the
program in the target location to make sure you really want to overwrite it.
To evaluate a program before you overwrite it:
1. Get ready to save by pressing the record button. It starts ashing.
2. Press the global button. Both LEDs on the button light up, indicating
compare mode.
3. Use the program buttons to navigate to the sound you want to compare
and play the keyboard to hear the sound.
4. To disable the compare function and go back to the edited sound, turn
off the global button. Programs can’t be written while in compare
mode.
5. If you want to save the edited sound, the record button is still ashing
and ready to save, so enter a location with the program buttons. The
sound is saved.
6. Alternatively, if you want to cancel saving and continue editing, press
the record button. It stops ashing and saving is canceled.