User manual

6
Setting Up the Prophet-10
Sequential
Sound Banks
The Prophet-10 contains a total of 400 programs. 200 are permanent
“Factory” programs and 200 are “User” programs that can be over-
written. You can edit the programs of either set, but you can only save
sounds to the User set.
When the factory switch is enabled, the permanent Factory sound set is
active. When the factory switch is disabled, the User sound set is active.
As shipped from the factory, both sound sets are identical.
Group, Bank, and Program Number selectors
Selecting Programs
Use the group, bank, and program selector buttons to select and recall
programs.
To choose a program:
1. Press the group select button to specify the “hundreds” bank of the
program. Each time you press the button, the number increments and
cycles through Groups 1-5.
2. Press the bank select button to specify the “tens” bank of the program.
Each time you press the button, the number increments and cycles
through Banks 1-5.
3. Press the a program selector button (1-8) to specify the “ones” digit of
the program.
To choose program 123, for example:
1. Press the group select button as many times as needed to cycle around to 1.
2. Press the bank select button as many times as need to cycle around to 2.
3. Press program selector button 3.