User manual

Table Of Contents
1
Prophet-10 Users Guide
Chapter 1: Getting Started
Chapter 1: Getting Started
The Prophet-10 is a ten-voice, polyphonic analog synthesizer with analog
voltage-controlled oscillators, lters, and ampliers. It faithfully repro-
duces the vintage sound and features of all three revisions of the original
Sequential Circuits Prophet-5. It does this through the use of genuine
Curtis VCOs and lters as well as Dave Rossum’s newly designed SSI
2140 lter — the modern counterpart of his original SSM 2040, which
was used in vintage Prophet-5-Rev1 and Rev2 synths. The Prophet Rev3
featured CEM 3320 Curtis lters. By featuring both types of lters, the
new Prophet-5 provides the best of all worlds — and all Prophet-5s.
The Prophet-10 is rst and foremost a performance instrument. All of
its sound-shaping controls are immediately accessible on its front panel,
packing a tremendous amount of power and versatility into a compact,
easy-to-use format.
This chapter of your users guide provides an overview of essential tasks
such as how to make basic audio connections and how to edit and save
sounds. Later chapters explain each of the parameters of the Prophet-10
as well as how to program sounds and how to use the global menu to
manage its overall behavior.
All of the Prophet-10’s essential controls are within easy reach on its
front panel, so go ahead and dive in and start turning knobs and pressing
buttons to explore its sound and capabilities. Then, when you’re ready,
dig into this users guide to explore the deeper parts of the synth.
Prophet-10 front panel