User Manual

88 Appendix D: MIDI Implementation Dave Smith Instruments
CC# Param
16 Slider 2 Pressure
18 Delay 1 Time
19 Delay 1 Sync
20 Delay 1 Amount
21 Delay 1 Feedback
23 Delay 2 Time
24 Delay 2 Sync
25 Delay 2 Amount
26 Delay 2 Feedback
28 Delay 3 Time
29 Delay 3 Sync
30 Delay 3 Amount
31 Delay 3 Feedback
32 Bank Select
1011 nnnn 0100 1010 0vvvvvvv Brightness: When assigned to Pedal 1 or
Pedal 2
1011 nnnn 0000 1101 0vvvvvvv Expression: When assigned to Pedal 1 or
Pedal 2
1011 nnnn 0010 0000 0vvvvvvv Bank Select: 0 - 7
1011 nnnn 0100 0000 0vvvvvvv Damper pedal: Sends 0 if off, 0111 1111
when on
1011 nnnn 0000 0111 0vvvvvvv Volume knob
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages transmitted.
Additional Continuous Controllers Transmitted/Received
The following table details how MIDI Continuous Controllers (CCs) are
mapped onto Pro 2’s controls. They are transmitted when MIDI Param
Send is set to CC in Global, and recognized when received when MIDI
Param Receive is set to CC in the Global menu.
CC# Param
1 Mod Wheel
2 Breath
3 BPM
4 Foot Controller
5 Glide Mode
6 Data Entry MSB
7 Volume
8 Osc 1 Sub Octave
9 Distortion Amount
11 Expression
12 Voice Volume
13 Slider 1 Position
14 Slider 2 Position
15 Slider 1 Pressure