User Manual

75
Pro 2 Operation Manual
A Few Tutorials
10. Adjust threShold until the audio begins to trigger the envelopes.
11. Adjust the envelope follower’s attack and releaSe if desired. (Access
these parameters in the display by turning the oSc 1 Sub octave knob on the
front panel.)
12. Adjust the font panel lter cutoff and reSonance parameters as desired.
13. Adjust any other parameters such as distortion and delay to tailor the
sound.
Connect an expression pedal to the Pro 2 and route it to lter cutoff in the
mode matrix for more real-time control over the wah effect.
Syncing the Sequencer with an External MIDI Device
It’s possible to sync the Pro 2’s sequencer with an external MIDI device
such as a Tempest drum machine or digital audio workstation using MIDI
clock.
To sync a sequence to an external MIDI clock:
1. Connect the external MIDI device’s MIDI Out to the MIDI In of the
Pro 2.
2. Set the external MIDI device to MIDI Clock Master.
3. On the Pro 2, press the global button and select midi clock mode (menu
item 4). Then set midi clock mode to Slave.
4. Also in the global menu, set midi clock cable to midi port.
5. Press the Sequencer button to turn on the sequencer.
6. Set play Source to Sequencer.
7. Set play mode to normal.
8. Start MIDI playback on the external device. The Pro 2 sequencer
will start and stop playback in response to MIDI Start/Stop/Continue
messages.