User Manual

54 Sequencer Dave Smith Instruments
3. Repeat for any additional steps/rests.
4. To listen to the sequence, make sure the Sequencer button is on, then
press play/Stop.
If you are working with a 32-step sequence, use the steps 1-16 and steps 17-32
buttons to toggle between the two sets of steps.
Notes
Slew
Velocity
Note: C5 Slew:0 TieVel: 96
C
5
C
5
* *
* *
* *
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
C
5
Rest/Tie
steps 3-4
have rests
Adding Ties
Ties allow you to increase the duration of a note in a sequence (i.e. the
number of steps that it’s held). You can add ties to an existing sequence,
or if you’re creating a sequence in step mode, you can add them as you go.
Sequence step LEDs appear slightly dimmed on steps that are tied.
To add ties to an existing sequence:
1. Hold down the track Select button and press the step LED with the
same number as the track you want to edit. Release the track Select
button.
2. Press and continue to hold the LED button for the step where the tie will
start.
3. Press the LED button for the step where the tie will end.
4. Release the buttons.
5. To create additional ties, repeat steps 1-4.