User Manual
Table Of Contents
- Thank You
- Getting Started
- Connections
- Global Settings
- Oscillators
- Character
- Filter 1 & 2
- Filter Envelopes 1 & 2
- Amplifier Envelope
- Auxiliary Envelopes 4 & 5
- Low Frequency Oscillators
- Modulation
- Arpeggiator
- Sequencer
- Master Volume/Voice Volume
- Distortion
- Glide
- Pitch and Modulation Wheels
- Touch Sliders
- Play List
- Misc Parameters
- Using USB
- A Few Tutorials
- Appendix A: Modulation Sources
- Appendix B: Modulation Destinations
- Appendix C: Delay Times (Delays 1-3)
- Appendix D: MIDI Implementation
- Appendix E: Support
- Bookmark 1
- _GoBack
- Bookmark 1
- MIDI_Implementation
- _Ref259391539
- _GoBack
- MIDI_messages
- _Ref47692693
- _Ref47691913
- _Ref47691938
- _Ref47692569
- _Ref47692613
- _Ref47692643
43
Pro 2 Operation Manual
Low Frequency Oscillators
Phase: 0...127—(In the lfo control tab in the display) Used in
conjunction with Wave Reset, Phase sets the initial phase, from 0 to 360
degrees, at which the LFO wave shape starts when keyed on. Each step
represents 2.8125°, so a value of 32 equals 90°, 64 equals 180°, and so on.
Use Phase to offset the start point when Wave Reset is on. For Phase to have
any noticeable effect, Wave Reset must also be turned on for that LFO. If the LFO is
free-running—that is, with Wave Reset off—there is no xed start point from which the
phase can be offset.
0°
90°
180°
64 96 127320
Phase Offset
in Degrees
Phase Parameter
Value
270°
360°