User Manual

35
Pro 2 Operation Manual
Auxiliary Envelopes 4 & 5
To create a program in which velocity controls modulation amount, turn aux
envelope amount down and turn velocity amount up.
Feedback
Feedback sends the analog output of the VCA to a tuned delay, whose
output is mixed with the oscillators and input to the character effects.
By using varying degrees of feedback you can produce a range of effects
ranging from slightly metallic to downright nasty.
TuningFeedback Amt
FEEDBACK
Feedback Amount: -127...0...127—Sets the level of feedback. As the
level goes up, the feedback will eventually oscillate at the set Tuning.
Medium levels of feedback add depth and movement to the sound.
Negative values invert the signal producing different results than positive
values.
Be careful when using feedback and lter settings with high resonance. Things
can get loud quickly!
Tuning: 0…48—Sets the base frequency of the feedback loop. It steps in
semitones from C0 to C4 for a four-octave range. The frequency always
tracks the keyboard. The exact frequency is inuenced by other factors, such
as the lter frequency and lter type, which can drive it slightly sharp or at.
You can modulate feedback tuning by routing a source such as note number to
Feedback tuning in the mod matrix.