User Manual
Table Of Contents
- Thank You
- Getting Started
- Connections
- Global Settings
- Oscillators
- Character
- Filter 1 & 2
- Filter Envelopes 1 & 2
- Amplifier Envelope
- Auxiliary Envelopes 4 & 5
- Low Frequency Oscillators
- Modulation
- Arpeggiator
- Sequencer
- Master Volume/Voice Volume
- Distortion
- Glide
- Pitch and Modulation Wheels
- Touch Sliders
- Play List
- Misc Parameters
- Using USB
- A Few Tutorials
- Appendix A: Modulation Sources
- Appendix B: Modulation Destinations
- Appendix C: Delay Times (Delays 1-3)
- Appendix D: MIDI Implementation
- Appendix E: Support
- Bookmark 1
- _GoBack
- Bookmark 1
- MIDI_Implementation
- _Ref259391539
- _GoBack
- MIDI_messages
- _Ref47692693
- _Ref47691913
- _Ref47691938
- _Ref47692569
- _Ref47692613
- _Ref47692643
137
Pro 2 Operation Manual
Appendix E: Support
The Pro 2 plays out of tune.
Check Master Coarse Tune and Master Fine Tune in the Global menu. If
that seems correct, run Calibrate Wheels in the Global menu.
The touch sliders don’t go full range.
Run Calibrate Sliders in the Global Menu.
A lter sounds strange or out of tune.
Run Autotune Filters in the Global menu.
It is not necessary to run any of the calibration routines on a regular basis. You
should only run it if you are experiencing problems.
Still experiencing a problem with the Pro 2? Reset Globals in the Global
menu.
Contacting Technical Support
If you are still having a problem with the Pro 2, contact Technical
Support at support@davesmithinstruments.com. Please include your Pro
2’s serial number, the version of the operating system (displayed in the
Global screen), and the purchase date.
If you have not already reset the Global parameters and run the calibration
routines (see Troubleshooting, above), you should do it before contacting Technical
Support. It’s probably the rst thing they’ll ask you to do.