User Manual

58
Appendix D: MIDI Implementation
Dave Smith Instruments
Transmitted Controller Messages
Status Second Third Description
1011 nnnn 0000 0001 0vvvvvvv Mod Wheel
1011 nnnn 0000 0010 0vvvvvvv Breath Controller: When assigned to Pedal
1 or Pedal 2
1011 nnnn 0000 0100 0vvvvvvv Foot Controller: When assigned to Pedal 1
or Pedal 2
1011 nnnn 0000 0111 0vvvvvvv Volume: When assigned to Pedal 1 or Pedal 2
1011 nnnn 0100 1010 0vvvvvvv Brightness: When assigned to Pedal 1 or
Pedal 2
1011 nnnn 0000 1101 0vvvvvvv Expression: When assigned to Pedal 1 or
Pedal 2
1011 nnnn 0010 0000 0vvvvvvv Bank Select: 0 - 7
1011 nnnn 0100 0000 0vvvvvvv Damper pedal: Sends 0 if off, 0111 1111
when on
1011 nnnn 0000 0111 0vvvvvvv Volume knob
See sections below for additional Continuous Controller (CC) and Non-
registered Parameter Number (NRPN) messages transmitted.
Additional Continuous Controllers Transmitted/Received
The following table details how MIDI Continuouse Controllers (CCs)
are mapped onto Prophet 12’s controls. They are transmitted when MIDI
Param Send is set to CC in Global, and recognized when received when
MIDI Param Receive is set to CC in the Global menu.
CC# Param
1 Mod Wheel
2 Breath
3 BPM
4 Foot Controller
5 Glide Mode
6 Data Entry MSB
7 Volume
8 Osc 1 Sub Octave
9 Distortion Amount
10 Pan Spread
CC# Param
11 Expression
12 Voice Volume
13 A/B Mode
14 Slider 1 Position
15 Slider 2 Position
16 Slider 1 Pressure
17 Slider 2 Pressure
18 Delay 1 Time
19 Delay 1 Sync
20 Delay 1 Amount