User Manual

33
Prophet 12 Operation Manual
Modulation
2. Choose a source by turning its knob or pressing its button, or my
using a controller (pitch wheel, mod wheel, or touch slider).
The Modulation screen is displayed and that source is assigned to
the rst available mod slot. Release assign moD soUrce.
3. Press and hold assign moD Destination.
4. Choose a destination by turning its knob or pressing its button.
That destination is assigned to the mod slot. Release assign moD
Destination.
5. Use either the amoUnt knob or soft knob 3 to set the modulation
amount.
New modulation paths can easily be assigned by repeating these steps
until all of the available mod slots are used.