User Manual
32
Modulation
Dave Smith Instruments
Modulation
The Prophet 12 has eight xed-source modulation paths and a 16
x 2 modulation matrix where the mod sources and destinations are
completely user congurable. There are 26 modulation sources and 97
destinations. For complete lists of all the sources and destinations, see
page 49 and page 50.
To display the mod routings, press either of the assign moD buttons in
the Modulation section.
B1 P32: Heavy Dumplings
Mod 3:
Mod 2:
Mod 1: Mod Wheel 23 LFO 1 Amount
Slider 1 Position 50 LPF Cutoff
Slider 2 Position -50 HPF Cutoff
Sort Source Sort Dest
Edit Mod 1
Sort Slot
Source Amount Destination
Soft knob 1 selects the modulation slot to edit.
Source (Soft knob 2) sets the modulation source.
Amount (Soft knob 3) sets the amount of modulation from the source to
the destination. Amount can be set over a range of -127 to 127.
Destination (Soft knob 4) sets the modulation destination.
Sort Slot (Soft key 1) sorts the 24 mod slots in order.
Sort Source (Soft key 2) sorts the mod slots by Source, to more easily see
how a single source may be routed to multiple destinations.
Sort Dest (Soft key 3) sorts the mod slots by Destination, to more easily
see how multiple sources may be routed to a single destination.
Using the Assign Mod Buttons
The Prophet 12 provides a shortcut for modulation routing in the form of
the Assign Mod Source and Assign Mod Destination buttons.
To assign modulation:
1. Press and hold assign moD soUrce.