User Manual
29
Prophet 12 Operation Manual
Low Frequency Oscillators
Destination—The parameter being modulated by the LFO. See
Modulation Destinations on page 50 for a list of possible destinations.
Sync: Off, On—When on, Frequency displays note values that sync
precisely with the arpeggiator and delay.
Displayed Value Cycle Duration
32nd Trip 1/12 of 1 beat
32nd 1/8 of 1 beat
16th Trip 1/6 of 1 beat
16th 1/4 of 1 beat
8th Trip 1/3 of 1 beat
8th 1/2 of 1 beat
Qrtr Trip 1 1/3 beats
1 Qrtr 1 beat
Qrtr Dot 1 1/2 beats
1/2 Note 2 beats
3 Qrtr 3 beats
4 Qrtr 4 beats
6 Qrtr 6 beats
8 Qrtr 8 beats
16 Qrtr 16 beats
32 Qrtr 32 beats
Phase: 0...127—Used in conjunction with Wave
Reset, Phase sets the initial phase, from 0 to 360
degrees, at which the LFO wave shape starts when
keyed on. Each step represents 2.8125°, so a value of
32 equals 90°, 64 equals 180°, and so on.
Note: For Phase to have any noticeable effect,
Wave Reset must also be turned on for that LFO.
If the LFO is free-running—that is, Wave Reset is
off—there is no xed start point from which the
phase can be offset.
Slew Rate: 0...127—Slew rate is dened as the
maximum possible rate of change of a signal.
0°
90°
180°
64 96 127320
Phase Offset
in Degrees
Phase Parameter
Value
270°
360°