User Manual

Miscellaneous Modulators

There are certain standard controllers that Mopho x4 consigns to dedicated

modulators, things like mod wheel, pressure (AKA aftertouch), and velocity.

The most obvious benefits to doing this is it provides a shortcut to setting up

commonly used controllers and it frees up the four general-purpose mod slots

for other, more Mopho x4-specific applications. Select M

ISC MOD in the

Modulation section to get started.

Source: Mod Wheel (MIDI CC#1), Pressure, Breath Controller (MIDI CC#2),

Velocity, Foot Controller (MIDI CC#4)

—Selects the modulation source. The

source can also be changed using the 1-4 button, though the 1-4 LEDs do not

change.

Note: There is a global parameter called Pedal for routing an expression

pedal to various controllers or directly to the filter cutoff. See Global

Parameters on page 8 for more information.

Destination—Chooses the destination to which the modulation source is routed.

See Modulation Destinations on page 33 for a list of possible destinations.

Amount: -127…+127—Sets the amount of modulation.