User Manual

75
Pro 3 User’s Guide
Sequencer
Recording Additional Sequencer Tracks for Modulation
Tracks 4-16 can be freely assigned to any modulation destination. You
can either start the Sequencer running and record the modulation values
in real time by turning parameter knobs (in which case the Sequencer
automatically assigns a track to the edited parameter) or you can input
values step by step with the Sequencer stopped.
Here’s how to sequence lter cutoff modulation step-by-step.
To modulate lter cutoff frequency using Sequencer Track 4:
1. Press and hold the track sel button then press Sequencer step LED 4.
(Alternatively, turn Soft Knob 1 (select track) to select track 4.)
2. While continuing to hold down the track select button, turn Soft Knob
4 (dest) to select cutoff.
3. Release the track select button.
4. Turn Soft Knob 1 to go to the desired step in the sequence
5. Turn Soft Knob 3 (val) to set a value.
6. Repeat steps 4 and 5 for each step in the sequence until nished.
7. To listen to the sequence, press play.
If the length of track 1 (notes) is longer or shorter than the modulation tracks in a
sequence, you can make all tracks restart to step 1 when track 1 plays step 1 by enabling
sync to track 1 in the seq params menu (pres the arpeggiator button to display this menu).