User Manual

74
Sequencer
Sequential
To edit a track used for modulation:
1. Press the sequence button to select the sequence you want to edit: A,
B,C, or D.
2. To show the desired track in the display, hold down the track sel
button and press the step LED with the same number as the track you
want to edit.
3. Use Soft Knob 1 (step) to scroll to the step you want to edit.
4. Turn Soft Knob 3 (val) to enter a value, 1-127. Most values range from
-127 to +127.
5. To save the sequence, save the program by pressing the write button
twice.
Setting or Changing the Destination of a Track
Each of the four sequences, A,B,C, and D have 16 tracks. Tracks 1-3 are
reserved for note-related functions. Tracks 4-16 can be freely assigned.
To set or change the destination of a sequence track:
1. Show the desired sequence and track in the display by pressing the
sequence button to select the sequence you want ( A, B,C, or D) then
holding down the track sel button and press the step LED with the
corresponding track number you want to edit.
2. Press and hold the track sel button and turn Soft Knob 4 to scroll
though a list of destinations. Remember that tracks 1-3 are reserved for
note-related functions. Tracks 4-16 can be freely assigned.
A quick way to set the destination of a Sequencer track is to hold down the track
select button and turn the front-panel knob for the parameter you want to route to that
track.