User Manual

34
Filters
Sequential
Additional Filter Envelope Parameters (Display Menus)
Additional Filter parameters are accessible through the menus in the
main display. To see these menus, adjust any of the lter envelope controls
in the envelopes section of front panel. The envelope parameters are in
menu Tab 3 and Tab 4. The parameters explained below are the ones that
don’t appear on the front panel.
TAB4 - Env Amount
Amt:+25
Amount DelayVel On/O Env Loop
Vel:On
Loop:O
Del:0
ADSR Env AmtFilter MiscFilter
Delay: 0...127—Sets a delay between the time the envelope is triggered
(note on) and when the attack portion actually begins.
Loop: Off, On—When on, the Delay, Attack, and Decay segments of
the envelope repeat. Sustain still affects the level at which the Decay
segment ends, but instead of sustaining at a xed level while a key is
pressed, Delay, Attack, and Decay loop until the key is released. The
Release segment begins when the key is released, just as it does when
Repeat is off.