User Manual

Table Of Contents

Pro 3 User’s Guide

Sequencer

5. When you’re done, press play. Your sequence plays back. To stop play-

back, press play again.

6. To resave the sequence, save the program by pressing the write button

twice.

A quick way to add a rest to an already-recorded sequence is to toggle off the

front-panel LED/button for that step. The step/button can be toggled on again if you want.

BPM DIVIDE SWING

TAP TEMPO ARPEGGIATORVALUE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

TRACKS

SLEWSEQ LOCKCUE PGM

TRACK SEL

notes/vel duration ratchet cutoff assign 1 assign 2 assign 3 assign 4 assign 5 assign 6 assign 7 assign 8 CV out 1 CV out 2 CV out 3 CV out 4

A B C D

SEQUENCE RECORD PLAY MODE RESETDIRECTION

fwd

Normal

Gated

Trigger

rev fwd/rev random

An unlit LED

indicates a rest

Unlit LEDs indicate rests (or steps with no notes recorded)

To add rests to an existing sequence using the sequence editor:

1. To show the track in the display, hold down the track sel button and

press the step LED with the same number as the track you want to edit

(step 1 = track 1, and so on).

2. Release the track sel button. The track appears in the display.

3. On the front panel, toggle off the LEDs for the steps that you want to

rest. (The step can be toggled on again if you want.) The rest appears as

an asterisk (*) in the display.

4. Repeat for any additional steps/rests.

5. To listen to the sequence, press play.

Notes

Velocity

Step: A1 Note: C5 Vel: 66Track 1

* *

steps 2-3

have rests

Velocity Duration Ratchet Seq: A