User Manual

63
Pro 3 User’s Guide
Sequencer
To transpose a sequence up or down during playback:
1. Press the play button to hear the sequence.
2. Press a note on the keyboard above or below middle C. The sequence is
transposed to that key. (Middle C plays the sequence as recorded.) For
greater range, use the Transpose Up or Transpose Down buttons.
3. During playback, if you want to restart a sequence from step 1, press
the reset button.
To record over an existing note sequence:
1. Press the record button.
2. Play different notes on the keyboard. The numbered step LEDs indicate
which step you’re on.
3. When you’re done, press play to listen to the new sequence.
4. To resave the sequence, save the program by pressing the write button
twice.
Recording Phrases/Sequences A,B,C, or D.
The Pro 3 can record up to four independent phrases/sequences per
program. You can select among these by pressing the A,B,C,or D
sequence buttons on the front panel. During real-time playback you can
switch between these on the y. (You can also chain them together for
sequences longer than 16 steps. See “Creating An Extended Sequence”
on page 66 for more details.)
To record Sequence B,C, or D:
1. Press sequence button B,C, or D.
2. Press the record button and play a sequence of notes on the keyboard.
3. When you’ve nished, press the play button to hear your sequence.
As noted above, you can switch between sequences A,B,C, and D on the
y during playback by simply pressing the button of the sequence you
want to play. You can also chain them together for sequences longer than
16 steps. See “Creating An Extended Sequence” on page 66 for more
details.