User Manual

57
Pro 3 User’s Guide
Arpeggiator
MIDI Note Output from the Arpeggiator
e Arpeggiator outputs MIDI note messages. Any notes that you hold
on the keyboard will be arpeggiated according to the current settings of
the Arpeggiator and output over MIDI as MIDI notes. You can use this
feature to drive other MIDI-equipped devices such as synthesizers and
drum machines. To access this feature, use the    setting in
the  menu.
To enable MIDI Note output from the Arpeggiator:
1. Press the  button, then turn So Knob 1 to select  
.
2. Turn So Knob 3 to select .
To control an external MIDI device:
1. Connect the MIDI or USB output of the Pro 3 to the MIDI or USB
input of the external device, depending on which type of connection
the external device requires.
2. On the Pro 3, press the global button, then use Soft Knob 1 to select
midi out select.
3. Use the So Knob 3 knob to select , or , or +, depend-
ing on how your Pro 3 and external device are connected.
4. Press the  button again to exit the Global menu.
5. On the external device, set the the MIDI Channel and MIDI Receive
port to match the Pro 3.
6. Hold down a chord on the Pro 3 or start Sequencer playback. e exter-
nal device should be triggered by the arpeggiated or sequenced notes.