User Manual

55
Pro 3 User’s Guide
Arpeggiator
Set the tempo of the Arpeggiator with the tap tempo or bpm and divide
controls. To use tap tempo, tap this button 4 times to set the tempo. You
can also sync the Arpeggiator to external MIDI clock, or even an exter-
nal audio signal.
The Arpeggiator can run concurrently with the Sequencer for arpeggiated
patterns with sequenced parameter automation. To do this, turn on the Arpeggiator
and set the Sequencer mode to trigger. The Sequencer will step with each Arpeg-
giator step. You can even record parameter changes during Arpeggiator playback by
holding down the Sequencer’s record button and turning knobs to make parameter
changes in real time. The parameter changes will be recorded and included in the
sequence.
BPM DIVIDE SWING ARPEGGIATOR
10 11 12 13 14 15 16
assign 6 assign 7 assign 8 CV out 1 CV out 2 CV out 3 CV out 4
MODE
RESETDIRECTION
fwd
Normal
Gated
Trigger
rev fwd/rev random
Press to enable
the Arpeggiator
The Arpeggiator
To use the Arpeggiator:
1. Press the arpeggiator on/off button to turn it on.
2. Hold down one or more notes on the keyboard. The Arpeggiator plays
them according to the settings you’ve chosen.
3. To latch arpeggiation on (so that you don’t have to continuously hold
down notes) press the hold button.
4. In the display menu, adjust settings such as mode, octave range,
repeats, and bpm.
5. To synchronize a delay effect to the Arpeggiator, enable Effect 1 or Effect
2, choose a delay, then turn on sync in the delay’s parameter page in the
display. Adjust the delay’s time parameter as desired.