User Manual

53
Pro 3 User’s Guide
Effects
Sync (in the main display): On, Off—When a delay effect is chosen, this
enables syncing of the timed delay repeats (feedback) to the Arpeggiator,
Sequencer, or MIDI clock. When sync is on, delay time has the following
values:
Value Delay Time
Whole (1) 4 beats
Half dot (2D) 3 beats
Half (2) 2 beats
Quarter dot (4D) 1 1/2 beats
Quarter (4) 1 beat
Quarter triplet (4T) 1 1/3 beats
8th dot (8D) 3/4 of 1 beat
8th (8) 1/2 of 1 beat
8th triplet (8T) 1/3 of 1 beat
16th dot (16D) 3/8 of 1 beat
16th (16) 1/4 of 1 beat
Maximum delay time is approximately 1 second. The combination of longer
synced delay times with slower tempos can result in delay times that would be greater
than 1 second. When that happens, the delay time is divided by 2 until it no longer
exceeds the 1 second limit. For example, if the BPM is set to 60 and Delay Time
(Parameter 1) is set to Half, the expected delay time would be 2 seconds. The actual
delay time will be 1 second (i.e. 2 seconds divided by 2).
Parameter 1: Variable, depending on the effect—This knob adjusts
parameter 1 for the chosen effect. Each effect has three adjustable
parameters, which differ depending on the effect.
Parameter 2: Variable, depending on the effect—This knob adjusts
parameter 2 for the chosen effect. Each effect has three adjustable
parameters, which differ depending on the effect.
Parameter 3: Variable, depending on the effect—This knob adjusts
parameter 3 for the chosen effect. Each effect has three adjustable
parameters, which differ depending on the effect.