User Manual
Table Of Contents
- A Few Words of Thanks
- Chapter 1: Getting Started
- Rear Panel Connections
- Setting Up the Pro 3
- Using the Main Display
- Sound Banks
- Editing Programs
- Saving a Program
- Using Paraphonic Mode
- Exploring the Pro 3 in Greater Depth
- Chapter 2: Pro 3 Controls
- Oscillators
- Mixer
- Filters
- Amplifier Envelope
- Auxiliary Envelopes
- Low Frequency Oscillators
- Modulation
- Effects
- Arpeggiator
- Sequencer
- Normal, Gated, and Trigger Modes
- Programming the Sequencer
- Recording Phrases/Sequences A,B,C, or D.
- Sequencing Parameter Changes in Real-Time
- Copying a Sequence from One Track to Another
- Copying and Pasting an Entire Sequence
- Muting a Sequence Track
- Creating An Extended Sequence
- Paraphonic Sequencing
- Adding Rests, Ties, and Velocity
- Editing Duration
- Adding Ratcheting
- Editing Other Elements of a Sequence
- Setting or Changing the Destination of a Track
- Recording Additional Sequencer Tracks for Modulation
- Using Slew
- Turning off the Sequencer’s “Notes” Track
- Sequencer Parameters (Front Panel)
- Additional Sequencer Parameters (Display Menus)
- Cue Program
- Tuned Feedback
- Master Volume/Program Volume
- Transpose
- Hold
- Glide
- Pitch and Mod Wheels
- Touch slider
- Adding Aftertouch
- Distortion
- Play List
- Miscellaneous Parameters
- Global Settings
- Chapter 3: Programming the Pro 3
- Synthesis 101: Synth Bass
- Creating Synth Brass
- Creating a Hard-Sync Lead
- Chapter 4: Using the Pro 3 with External Devices
- Appendix A: Modulation Sources
- Appendix B: Modulation Destinations
- Appendix C: Troubleshooting and Support
- Appendix D: Calibrating the Pro 3
- Appendix E: Alternative Tunings
- Appendix F: MIDI Implementation
- Bookmark 1
- Bookmark 1
12
Using Paraphonic Mode
Sequential
5. Once you have found a location to overwrite, press the compare button
again to turn it off. (Programs can’t be written while in compare mode.)
6. The write button is still ashing and ready to save. Press write and the
sound is saved.
7. Alternatively, if you want to cancel saving and continue editing, press
the global button. Saving is canceled.
You can use the global button to set the program that appears when you
power on the Pro 3. Simply use the bank and program knobs to nd the program you
want, then press the global button twice. That program is now the default program on
start up.
Using Paraphonic Mode
The Pro 3 was designed primarily as a monophonic instrument. But we
added a 3-voice paraphonic playback mode for extra performance power.
In this mode, the three oscillators can be triggered independently, each
with its own amplier envelope. (However, the lter and its envelope are
shared between the three oscillators.) This gives you the ability to play
chords of up to 3 notes.
Make sure to select a waveshape for oscillator 3 since it’s possible to set this
oscillator to off. Each oscillator is triggered with an envelope set by the VCA shape.
Write
Compare
Global
Play List
CUTOFF
Cuto DriveResonance Filter Type
RESONANCE
60 2060
DRIVE Filter Type
Env AmtFilter Env AmtFilter Misc ADSR
Ladder
Revert
Show
Misc Params
Paraphonic
Press the Paraphonic
button to enable
3-voice paraphonic mode.